kickstop_door_p3klbbb

BUY London Bar

The Staple (or the keep) is the metal part of the rim lock that is screwed onto the door frame

 

The Kickstop London Bar is a door frame reinforcing bar with a 'D' shaped staple to fit over and secure the staple (keep) of a surface fitted rim lock or cylinder nightlatch.  This very effective steel anti-burglary device is screwed on to the internal face of the lock side of the frame and will resist the kicking, splitting and forcing open of the door.

 

  • 5mm thick steel bar with a rounded edge and countersunk holes
  • 10mm, 1830mm or 1980mm long
  • 16mm or 20mm wide
  • Standard, Large, Extra Large, Universal of Ingersoll SC71 staple size
  • The staple of the London Bar (the 'D' shaped part) is available in three main sizes. Standard, Large and Extra Large.
  • The London Bar staple has to fit over the surface mounted rim lock staple - the part of the rim lock that is screwed onto the door frame.
  • Ensure that correct measurements are taken and the correct London Bar staple size is chosen.
  • The Universal size staple is designed for customers who are not sure whether to purchase a Standard or Large size.

 

NB: Rim locks and nightlatches are fitted at slightly different heights on individual doors.  When fitting the 72" and 78" length London Bars, a little of the top or the bottom of the London Bar will probably need to be removed when fitting. The surplus can be cut off with a hacksaw.

The 'D' shaped bend in the two longer London Bars is positioned at the approximate height of where most surface mounted nightlatches should normally be fitted.

The 72" bar is approximately 6" shorter than the height of a door frame - to help minimize the need to hacksaw off a piece of the bar.

Code 2009: (Kickstop Universal London Bar)

The 'Universal' 30mm x 97mm large staple size can easily be 'altered' and 'reduced' to the 30mm x 70mm standard staple size - by using the two extra fixings

Code 9606: (Kickstop Standard London Bar)

Standard 70mm x 30mm staple

 

 

Universal Staple 

(The internal measurements of the 'D' shape staple are 30mm x 70mm to 97mm)

Large size staple that can easily be 'altered' to fit over a standard size staple of 30mm x 70mm by using the two supplied fixings to 'reduce' the size to 70mm - as shown

Standard Staple

(The internal measurements of the 'D' shape staple are 30mm x 70mm)

To fit over the staple of a smaller nightlatch

Large Staple

(The internal measurements of the 'D' shape staple are 30mm x 97mm)

To fit over the staple of a large size rim lock or nightlatch

Extra Large Staple

(The internal measurements of the 'D' shape staple are 40mm x 105mm)

To fit over the staple of larger size rim lock or nightlatch

Kickstop London Bar Universal Staple (Medium/ Narrow)

  • Code: 2009 WH
  • Universal size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less **
  • White Colour
  • 72" (1830mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

** The 2 extra fixings allow the internal size of the staple to be 'reduced' from 97 to 70mm.  Perfect for customers who are unsure whether to purchase a London Bar with a Standard or Large size staple

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Universal Staple (Short/ Narrow)

  • Code: 2011 WH
  • Universal size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less **
  • White Colour
  • 24" (610mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

** The 2 extra fixings allow the internal size of the staple to be 'reduced' from 97 to 70mm.  Perfect for customers who are unsure whether to purchase a Standard or Large Staple

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Universal Staple (Short/ Wide)

  • Code: 2017 WH
  • Universal size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less **
  • White Colour
  • 24" (610mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

** The 2 extra fixings allow the internal size of the staple to be 'reduced' from 97 to 70mm.  Perfect for customers who are unsure whether to purchase a Standard or Large Staple

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Universal Staple (Medium/ Wide)

  • Code: 2010 WH
  • Universal size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less **
  • 72" (1830mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

** The 2 extra fixings allow the internal size of the staple to be 'reduced' from 97 to 70mm.  Perfect for customers who are unsure whether to purchase a Standard or Large Staple

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Standard Staple (Medium/ Narrow)

  • Code: 2606 WH
  • Standard size 'D' shape staple to fit over a lock staple/keep which is 30mm x 70mm - or less
  • White Colour
  • 72" (1830mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Standard Staple (Long/ Narrow)

  • Code: 9606
  • Standard size 'D' shape staple to fit over a lock staple/keep which is 30mm x 70mm - or less
  • 78" (1980mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Standard Staple (Short/ Narrow)

  • Code: 9608
  • Standard size 'D' shape staple to fit over a lock staple/keep which is 30mm x 70mm - or less
  • 24" (610mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Standard Staple (Long/ Wide)

  • Code: 9607
  • Standard size 'D' shape staple to fit over a lock staple/keep which is 30mm x 70mm - or less
  • 78" (1980mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Standard Staple (Short/ Wide)

  • Code: 9616
  • Standard size 'D' shape staple to fit over a lock staple/keep which is 30mm x 70mm - or less
  • 24" (610mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Large Staple (Medium/ Narrow)

  • Code: 2609 WH
  • Large size 'D' shape staple to fit over a lock staple/keep which is 30mm x 97mm - or less
  • White Colour
  • 72" (1830mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Large Staple (Long/ Narrow)

  • Code: 9609
  • Large size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • 78" (1980mm)  x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Large Staple (Short/ Narrow)

  • Code: 9611
  • Large size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • 24" (610mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Large Staple (Long/ Wide)

  • Code: 9610
  • Large size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • 78" (1980mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Large Staple (Short/ Wide)

  • Code: 9617
  • Large size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • 24" (610mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Extra Large Staple (Long/ Narrow)

  • Code: 9630
  • Extra Large size 'D' shape staple to fit over lock staple/keep which is 40mm x 105mm - or less
  • 78"(1980mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Extra Large Staple (Long/ Wide)

  • Code: 9631
  • Extra Large size 'D' shape staple to fit over lock staple/keep which is 40mm x 105mm - or less
  • 78" (1980mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Left Hand (Long/ Narrow)

  • Code: 9612
  • Ingersoll SC71 size 'D' shape staple to fit over lock staple/keep which is 30mm x 70mm - or less **
  • This is a Standard Size staple with a cut out to allow the Springbolt of the lock to pass through
  • 78" (1980mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

The staple is a modified Standard Staple size with a small cut out section that allows it to be used with the INGERSOLL SC71 Size - *LEFT HANDED

NB: *The lock would be fitted to *right hand side of door when viewed from inside - If in doubt - check before ordering

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Right Hand (Long/ Narrow)

  • Code: 9613
  • Ingersoll SC71 size 'D' shape staple to fit over lock staple/keep which is 30mm x 70mm - or less **
  • This is a Standard Size staple with a cut out to allow the Springbolt of the lock to pass through
  • 78" (1980mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

The staple is a modified Standard Staple size with a small cut out section that allows it to be used with the INGERSOLL SC71 Size - *RIGHT HANDED

NB: *The lock would be fitted to *left hand side of door when viewed from inside - If in doubt - check before ordering

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Extra Large Staple (Short/ Narrow)

  • Code: 9632
  • Extra Large size 'D' shape staple to fit over lock staple/keep which is 40mm x 105mm - or less
  • 24"(610mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame